OVERVIEW:
RULE OF THUMB - Regardless of your power rating, go for the largest size barrel you can install / afford. A 300bhp setup running boost, will have lower charge temps with a 5x10 barrel than with a 4x10 barrel.
The AVT Liquid to Air Barrel Intercooler utilises an internal extruded tube for charge gas which is sandwiched between a complex baffled passage of waterside fins for the coolant to multipass through the barrel. This internal design allows for maximum heat transfer but minimal charge gas pressure drop.
Cylindrical design aids flows and ease of installation
More rapid effective cooling than air to air for a given size
The barrel can be mounted inside the engine bay and does require direct cooling airflow
Reduced charge air pipe length due to ease of positioning meaning better throttle response
Perfect for rear engine installations
SPECIFICATIONS & DIMENSIONS
AVT 4" x 8" AVT Barrel Chargecooler / Liquid to Air Intercooler
Core Size : 4" x 8"
Diameter : 100mm
Total Length : 340mm
Inlet/Outlet Diameter : 59mm
Rated Flow : 400CFM / 300bhp
Tested to 45psi
Water inlet diameter : 19mm (3/4")
